E3G-R13 Photoelectric Sensors NEW

Sensing method

Retro-reflective with M.S.R. function

Sensing distance

0.5 m to 10 m (When using the E39-R2)

Standard sensing object

Opaque: 80 mm dia. Min.

Directional angle

Sensor:1 to 5 DEG

Reflector:40 DEG Min.

Light source

Red LED (700nm)

Power supply voltage

10 to 30 VDC (ripple(p-p) 10% included)

Current consumption

50mA DC Max.

Control output (Output type)

NPN/PNP open collector output

Control output (Load current)

0 to 100 mA

Control output (Residual voltage)

(DC) 1.2 V Max. (NPN output, Load current 100mA Max.)

(DC) 2 V Max. (PNP output, Load current 100mA Max.)

Operation mode

Light-ON/Dark-ON selectable

Load power supply voltage

30 VDC Max.

Protective circuit

Surge suppressor

Output short-cut protection

Power supply reverse polarity protection

Mutual interference prevention

Response time

1 ms Max.

Sensitivity setting

Single-turn adjustment

Ambient illuminance

Incandescent lamp:3000 lux Max., Sunlight:10000 lux Max.

Ambient temperature

Operating: -25 to 55 CEL

Storage: -30 to 70 CEL

(with no icing or condensation)

Ambient humidity

Operating: 35 to 85 %RH

Storage: 35 to 95 %RH

(with no condensation)

Insulation resistance

20 M OHM Min. at 500 VDC between charged parts and the case

Dielectric strength

1000 VAC at 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

500m/s2 for 3 times each in X, Y, and Z directions

Degree of protection

IEC60529: IP67

Applicable standard (EC Directive (Low Voltage Directive))

EN60947-5-2

Applicable standard (EC Directive (EMC Directive))

EMI: EN60947-5-2

Emission Enclosure: EN55011 Group 1 class A

EMS: EN60947-5-2

Immunity ESD: IEC61000-4-2

Immunity RF-interference: IEC61000-4-3

Immunity Burst: IEC61000-4-4

CE marking: Equipped

Connection method

Pre-wired models (Cable length: 2 m)

Indicator

Operation indicator(orange), Stability indicator(green)

Weight (packed state)

approx. 150 g

Tightening torque

1.2 N.m Max. (with M4 screw)

Material (case)

PBT

Material (lens)

Methacrylate resin

Material (cover)

Polyethyl sulfon

Accessories

Instruction manual, Adjustment driver, Reflector