E2E-X2D1-N Standard Proximity Sensor NEW

Cylinder type sensing head size

M30

Type

Unshielded

Sensing method

Inductive type

Sensing distance

20 mm -10% to +10%

Setting distance

0 to 16 mm

Differential distance

10% Max. of sensing distance

Sensing object

Ferrous metal (Sensitivity lowers with non-ferrous metals.)

Standard sensing object

Iron 54*54*1mm

Response frequency

DC: 0.1 kHz (average)

Power supply voltage

12 to 24 VDC (ripple(p-p) :10% Max.)

Operating voltage range

10 to 30 VDC

Leakage current

0.8 mA Max.

Control output (Output type)

DC 2-wire models with polarity

Control output (Switching capacity)

3 to 100 mA

Control output (Residual voltage)

(DC) 3 V Max. ?under load current with cable length of 2m?

Indicator

Operation indicator(red), Operation setting indicator(green)

Operation mode

NO

Protective circuit

Surge suppressor

Output short-cut protection

Standard or Different frequency

Standard

Ambient temperature

Operating: -25 to 70 CEL

Storage: -40 to 85 CEL

(with no icing or condensation)

Ambient humidity

Operating: 35 to 95 %RH

Storage: 35 to 95 %RH

(with no condensation)

Temperature influence

+-10% Max. of sensing distance in temperature range of -25 to +70CEL

(As the basis for sensing distance of 23CEL)

Voltage influence

+-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)

Insulation resistance

50 M OHM Min. at 500VDC between charged parts and the case

Dielectric strength

1000 VAC 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

1000m/s2 for 10 times each in X, Y, and Z directions

Degree of protection

IEC60529: IP67

Applicable standard (EC Directive (Low Voltage Directive))

EN60947-1

EN60947-5-2

Applicable standard (EC Directive (EMC Directive))

EMI: EN60947-5-2

Emission Enclosure: CISPR11 Group 1 class A

EMS: EN60947-5-2

Immunity ESD: IEC61000-4-2

Immunity RF-interference: IEC61000-4-3

Immunity Conducted Disturbance: IEC61000-4-6

Immunity Burst: IEC61000-4-4

CE marking: Equipped

Applicable standard (CCC mark)

Not equipped

Connection method

M12 connector models

Weight (Packed state)

approx. 90 g

Material (case)

Brass nickel plating

Material (sensing surface)

PBT

Material (clamping nuts)

Brass nickel plating

Material (toothed washer)

Iron zinc plating

Accessories

Instruction manual