E2E-X5F2 Standard Proximity Sensor NEW

Cylinder type sensing head size

M18

Type

Shielded

Sensing method

Inductive type

Sensing distance

5 mm -10% to +10%

Setting distance

0 to 4 mm

Differential distance

10% Max. of sensing distance

Sensing object

Ferrous metal (Sensitivity lowers with non-ferrous metals.)

Standard sensing object

Iron 18*18*1mm

Response frequency

DC: 0.6 kHz (average)

Power supply voltage

12 to 24 VDC (ripple(p-p) :10% Max.)

Operating voltage range

10 to 40 VDC

Current consumption

13 mA Max.

Control output (Output type)

PNP voltage-current output

Control output (Switching capacity)

0 to 200 mA

Control output (Residual voltage)

(DC) 2 V Max. ?under load current with cable length of 2m?

Indicator

Operation indicator(red)

Operation mode

NC

Protective circuit

Surge suppressor
Output short-cut protection
Power supply reverse polarity protection

Standard or Different frequency

Standard

Ambient temperature

Operating: -40 to 85 CEL
Storage: -40 to 85 CEL
(with no icing or condensation)

Ambient humidity

Operating: 35 to 95 %RH
Storage: 35 to 95 %RH
(with no condensation)

Temperature influence

+-10% Max. of sensing distance in temperature range of -25 to +70CEL
+-15% Max. of sensing distance in temperature range of -40 to +85CEL
(As the basis for sensing distance of 23CEL)

Voltage influence

+-1% Max. of sensing distance in rated voltage range +-15%. (As the basis for sensing distance at standard power voltage)

Insulation resistance

50 M OHM Min. at 500VDC between charged parts and the case

Dielectric strength

1000 VAC 50/60 Hz for 1 minute between charged parts and the case

Vibration resistance

10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

1000m/s2 for 10 times each in X, Y, and Z directions

Degree of protection

IEC60529: IP67
Company standard: Oil-proof

Applicable standard (EC Directive (Low Voltage Directive))

EN60947-1
EN60947-5-2

Applicable standard (EC Directive (EMC Directive))

EMI: EN60947-5-2
Emission Enclosure: CISPR11 Group 1 class A
EMS: EN60947-5-2
Immunity ESD: IEC61000-4-2
Immunity RF-interference: IEC61000-4-3
Immunity Conducted Disturbance: IEC61000-4-6
Immunity Burst: IEC61000-4-4
CE marking: Equipped

Applicable standard (CCC mark)

Not equipped

Connection method

Pre-wired models (Cable length: 2 m)

Weight (Packed state)

approx. 150 g

Material (case)

Brass nickel plating

Material (sensing surface)

PBT

Material (clamping nuts)

Brass nickel plating

Material (toothed washer)

Iron zinc plating

Accessories

Instruction manual