AFP0RC16CT Panasonic FP0R-C16CT PLC CPU 24VDC Power 8DI 8DO Transistor NPN RS232C New Original 1 Year Warranty

Product type of FP0R control unit

C10
(Relay output type only)

C14
(Relay output type only)

C16
(Transistor output type only)

Programming method / Control method

Relay symbol / Cyclic operation

Number of
I/O points

No expansion
(Control unit only)

10 points
[Input: 6,
Relay output: 4]

14 points
[Input: 8,
Relay output: 6]

16 points
[Input: 8,
Transistor output: 8]

With expansion 1
* Same type of control
and expansion units

Max. 58 points

Max. 62 points

Max. 112 points

With expansion 2
* Mix type of relay
and transistor units

Max. 106 points

Max. 110 points

Max. 112 points

Program memory

EEPROM (no backup battery required)

Program capacity

16 k steps

Number of
instructions

Basic

110 approx.

High-level

210 approx.

Operation speed

Up to 3,000 steps

Basic instructions: 0.08 μs Min. Timer instructions: 2.2 μs Min.
High-level instructions: 0.32 μs (MV instruction) Min.

3,001st and later steps

Basic instructions: 0.58 μs Min. Timer instructions: 3.66 μs Min.
High-level instructions: 1.62 μs (MV instruction) Min.

Operation
memory

Relay

Internal
relay (R)

4,096 points

Timer / Counter
(T / C)

1,024 points

Memory area

Data register (DT)

12,315 words

Index register (IX, IY)

14 words (IO to ID)

Master control relay points (MCR)

256 words

Number of labels (JMP and LOOP)

256 labels

Differential points

Equivalent to the program capacity

Number of step ladder

1,000 stages

Number of subroutines

500 subroutines

Special
functions

High speed counter

Single-phase: 6 points (50 kHz max. each) 2-phase: 3 channels (15 kHz max. each)*

Pulse output

Not available

4 points (50 kHz max. each) Two channels can be controlled individually.*

PWM output

Not available

4 points (6 Hz to 4.8 kHz)

Pulse catch input
/ interrupt input

Total 8 points (with high speed counter)

Interrupt program

Input: 8 programs (6 programs for C10 only)
/ Periodic: 1 program / Pulse match: 4 programs/td>

Periodical interrupt

In units of 0.5 ms: 0.5 ms to 1.5 sec. / In units of 10 ms: 10 ms to 30 sec.

Constant scan

In units of 0.5 ms: 0.5 ms to 600 ms

RS232C port

One RS232C port is mounted on each of C10CRS, C10CRM, C14CRS, C14CRM, C16CT, C16CP, C32CT, C32CP, T32CT, T32CP, F32CT and F32CP type
(3P terminal block) Transmission speed (Baud rate): 2,400 to 115,200 bits/s, Transmission distance: 15 m 9.8 ft. Communication method: half duplex

RS485 port

One RS485 port is mounted on each of C10MRS, C14MRS, C16MT, C16MP, C32MT, C32MP, T32MT, T32MP, F32MT and F32MP type(3P terminal block)
Transmission speed (Baud rate): 115.2 kbps (It is possible to change to 19.2 kbps by the setting.), Transmission distance: 1,200 m 3,937 ft, Communication method: half duplex

Maintenance

Memory
backup

Program and
system register

Stored program and system register in EEPROM

Operation
memory

Stored fixed area in EEPROM
Counter: 16 points
Internal relay: 128 points
Data register: 315 words

Self-diagnostic
function

Watchdog timer (690 ms approx.), Program syntax check

Real-time clock
function

Not available

Other functions

Rewriting in RUN mode, Download in RUN mode (incl. comments),
8-character password setting, and Program upload protection

Product type of FP0R control unit

C32
(Transistor output type only)

T32
(Transistor output type only)

F32
(Transistor output type only)

Programming method / Control method

Relay symbol / Cyclic operation

Number of
I/O points

No expansion
(Control unit only)

32 points
[Input: 16, Transistor output: 16]

32 points
[Input: 16, Transistor output: 16]

With expansion 1
* Same type of control
and expansion units

Max. 128 points

Max. 128 points

With expansion 2
* Mix type of relay
and transistor units

Max. 128 points

Max. 128 points

Program memory

EEPROM (no backup battery required)

Program capacity

32 k steps

Number of
instructions

Basic

110 approx.

High-level

210 approx.

Operation speed

Up to 3,000 steps

Basic instructions: 0.08 μs Min. Timer instructions: 2.2 μs Min.
High-level instructions: 0.32 μs (MV instruction) Min.

3,001st and later steps

Basic instructions: 0.58 μs Min. Timer instructions: 3.66 μs Min.
High-level instructions: 1.62 μs (MV instruction) Min.

Operation
memory

Relay

Internal
relay (R)

4,096 points

Timer / Counter
(T / C)

1,024 points

Memory area

Data register (DT)

32,765 words

Index register (IX, IY)

14 words (IO to ID)

Master control relay points (MCR)

256 words

Number of labels (JMP and LOOP)

256 labels

Differential points

Equivalent to the program capacity

Number of step ladder

1,000 stages

Number of subroutines

500 subroutines

Special
functions

High speed counter

Single-phase: 6 points (50 kHz max. each) 2-phase: 3 channels (15 kHz max. each)*

Pulse output

4 points (50 kHz max. each) Two channels can be controlled individually.*

PWM output

4 points (6 Hz to 4.8 kHz)

Pulse catch input
/ interrupt input

Total 8 points (with high speed counter)

Interrupt program

Input: 8 programs (6 programs for C10 only)
/ Periodic: 1 program / Pulse match: 4 programs/td>

Periodical interrupt

In units of 0.5 ms: 0.5 ms to 1.5 sec. / In units of 10 ms: 10 ms to 30 sec.

Constant scan

In units of 0.5 ms: 0.5 ms to 600 ms

RS232C port

One RS232C port is mounted on each of C10CRS, C10CRM, C14CRS, C14CRM, C16CT, C16CP, C32CT, C32CP, T32CT, T32CP, F32CT and F32CP type
(3P terminal block) Transmission speed (Baud rate): 2,400 to 115,200 bits/s, Transmission distance: 15 m 9.8 ft. Communication method: half duplex

RS485 port

One RS485 port is mounted on each of C10MRS, C14MRS, C16MT, C16MP, C32MT, C32MP, T32MT, T32MP, F32MT and F32MP type(3P terminal block)
Transmission speed (Baud rate): 115.2 kbps (It is possible to change to 19.2 kbps by the setting.), Transmission distance: 1,200 m 3,937 ft, Communication method: half duplex

Maintenance

Memory
backup

Program and
system register

Stored program and system register in EEPROM

Operation
memory

Stored fixed area in EEPROM
Counter: 16 points
Internal relay: 128 points
Data register: 315 words

Backup of the entire area by FeRAM
(without the need for a battery)

Backup of the entire area by a built-in secondary battery

Self-diagnostic
function

Watchdog timer (690 ms approx.), Program syntax check

Real-time clock
function

Not available

Available

Not available

Other functions

Rewriting in RUN mode, Download in RUN mode (incl. comments),
8-character password setting, and Program upload protection