TL-Q5MC1-F-Z Proximity Switch NEW

Model

TL-Q2MC1

TL-Q5MC[]

Sensing distance

2 mm ±15%

5 mm ±10%

Set distance

0 to 1.5 mm

0 to 4 mm

Differential travel

10% max. of sensing distance

Detectable object

Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on

Data Sheet.)

Standard sensing object

Iron, 8 × 8 × 1 mm

Iron, 15 × 15 × 1 mm

Response time

---

2 ms max.

Response frequency *

500 Hz

Power supply voltage

12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.

(operating voltage range)

Current consumption

15 mA max. at 24 VDC (no-load)

10 mA max. at 24 VDC

Control

Load current

NPN open collector

NPN open collector

output

100 mA max. at 30 VDC max.

50 mA max. at 30 VDC max.

Residual voltage

1 V max. (under load current of 100 mA with cable

1 V max. (under load current of 50 mA with cable

length of 2 m)

length of 2 m)

Indicators

Detection indicator (red)

Operation mode (with

NO

C1 Models: NO

sensing object approaching)

C2 Models: NC

Refer to the timing charts under DC 3-Wire Models on Data Sheet for details.

Protection circuits

Reverse polarity protection, Surge suppressor

Ambient temperature range

Operating/Storage: -10 to 60°C

Operating/Storage: -25 to 70°C

(with no icing or condensation)

(with no icing or condensation)

Ambient humidity range

Operating/Storage: 35% to 95% (with no condensation)

Temperature influence

±10% max. of sensing distance at 23°C in the

±20% max. of sensing distance at 23°C in the

temperature range of -10 to 60°C

temperature range of -25 to 70°C

Voltage influence

±2.5% max. of sensing distance at rated voltage in rated voltage ±10% range

Insulation resistance

50 MΩ min. (at 500 VDC) between current-

5 MΩ min. (at 500 VDC) between current-carrying

carrying parts and case

parts and case

Dielectric strength

1,000 VAC for 1 min between current-carrying

500 VAC, 50/60 Hz for 1 min between current-

parts and case

carrying parts and case

Vibration resistance

Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions

Shock resistance

Destruction: 1,000 m/s2 10 times each in X, Y, and

Destruction: 200 m/s2 10 times each in X, Y, and

Z directions

Z directions

Degree of protection

IEC 60529 IP67,

IEC IP67

in-house standards: oil-resistant

Connection method

Pre-wired Models (Standard cable length: 2 m)

Weight (packed state)

Approx. 30 g

Approx. 60 g

Materials

Case

Heat-resistant ABS

Sensing surface

Accessories

Instruction manual